Gilbarco Passport Pos Service Manual
Passport POS Only Gilbarco Veeder-Root ASC, technicians may attend certified training classes, CSC and SSC may attend with prior MSM approval. Six months Service Station experience is recommended. Passport certification class has a self-registered WEB based class at that needs to be completed successfully before any registrations can be accepted. This certification is for the technicians to install and service of the Passport POS system with Manager and Cashier functions will be covered.
Each Tech attending will have a Passport Combo (Manager and Cashier workstation) with a Client (Cashier Workstation) on their desk for Installation, loading software and troubleshooting. Each Tech will load software on the Server, Client and EDH. They will discover what manager programming can be loaded back and what will need to be entered again. They will experience the Passport registration process and Feature Activation. Troubleshooting can range from replacing hard drives to changing IP address's and more. Windows experience is necessary/mandatory.
Tools Required in the Classroom Laptops computers with an Ethernet port and RS232 port/converter. Techs will need to connect to the Internet either wired or wireless. The tech will need to have the ability to install a program to their laptops (will not work with Vista) and possible change network settings. Administrative rights will be needed. Class Information This 5 day Hands-On class begins Monday morning at 8:00am CST.
Lunch break is at 11:30am and class ends at 5:00pm, but could go longer. Fridays class will end at 4:30pm. The final written and practical test to be done Friday afternoon. Please schedule travel plans accordingly. PASSPORT Version 10 BLENDED 5-DAY Prerequisite: ASC, CSC Technicians $2600.00 per Technician with ELECTRONIC manuals (Includes class day’s lunch) Technicians need to have a valid GVR 'Fueling Site Safety' certification and Passport Pre-Course web based class with a valid Technician number Online material must be completed and passed before attending the Hands On class. Laptops will be needed in the classroom during the class and must have “Windows XP, “Windows 7” or “Windows 10”, also an Ethernet port and RS232 port/Converter.
Gilbarco Passport Pos System
After class daily tests will need to be completed. New Technicians that DO NOT have a Technician number through Gilbarco Veeder Root must fill out the form. This certification is for the technician to install and service of the Passport POS Version 10 system it does NOT include the certification for training on the use and programming of the Passport POS though some Manager and Cashier functions are covered.
Other WEB based classes maybe needed after completion of the Instructor Led class. Each Tech attending will have a Passport Combo (Manager and Cashier workstation) with a Client (Cashier Workstation), EDH, Router on their desk for Installation, loading software and troubleshooting.
Each Tech will load software on the Server, Client and EDH. They will discover what manager programming can be loaded back and what will need to be entered again. They will experience the Passport registration process and Feature Activation.
Troubleshooting can range from replacing hard drives to changing IP addresses and more. Windows experience is necessary/mandatory. Class begins at 8:00am CST Monday Morning. March 19 - March 23, 2018. May 21 – May 25, 2018. June 18 – June 22, 2018. July 23 – July 27, 2018.
September 24 – September 28, 2018. October 22 – October 26, 2018 Classes can be added for 3 techs or more.